The first thing they touch. Engineered to last decades.
Premium architectural aluminum entrance matting — custom-built in Türkiye, shipped factory-direct across America. ADA-considered, heavy-commercial-duty, and made to your exact opening.
CSI 12 48 13 · Revit & CAD · dual inch/mm — no login wall.
An entrance is the first thing every visitor touches — and the floor's first line of defense. A well-engineered matting zone captures the majority of the dirt and moisture tracked into a building, protecting the finishes behind it for decades.
Six engineered systems,
one custom-built standard.
From flush recessed thresholds to forklift-rated heavy-traffic grilles — every ALUEK system is made to your exact opening, recessed or surface-mounted.
GEGGUS-grade quality, written and sold the American way.
The premium incumbents route US architects through distributors and EU codes. The commodity sellers hide behind a phone number. ALUEK gives specifiers everything they need — on one domain, at factory-direct value.
Our approach- 50
- States shippedNationwide US logistics
- 100%
- Made-to-measureEvery system cut to spec
- 6063
- Aerospace-grade alloyT5 / T6 extruded profiles
- 12 48 13
- CSI spec-readyWritten the US way
Engineered for America, made in Türkiye
Premium aluminum craftsmanship from a NATO-ally manufacturing base, documented the way US architects specify — inch + mm dimensioning, CSI 12 48 13 language, and ASTM/ANSI-referenced performance.
Specifier-first, not sales-gated
Everything you need to draw, detail and specify lives on aluektrim.com — guide specs, CAD details, BIM-ready files, dual-unit datasheets and samples. No distributor in the middle, no login wall.
Heavy-commercial duty, custom to the opening
Extruded 6063 aluminum tread rails engineered for carts, trolleys and relentless footfall — fabricated to any size, curve or zoned layout, recessed or surface-mounted to fit your threshold exactly.
Factory-direct, fast and recyclable
Buy direct from the people who extrude it: factory-direct pricing, nationwide US shipping, and lead times engineered to beat trans-Atlantic suppliers. Aluminum is endlessly recyclable; anodizing is zero-VOC.
Everything you need to specify — no distributor, no login.
The single biggest gap in this category. Every competitor gates files behind partners and registration walls. We publish them, openly, in the formats US architects actually use.
CSI 12 48 13 guide specifications
Editable three-part guide specs in the section US architects actually use — Entrance Floor Mats & Frames.
DownloadCAD details — DWG / DXF
Recessed-well and surface-mount sections, transition and threshold details, profile cross-sections.
DownloadBIM-ready files
Parametric Revit families and IFC objects — coordinated depths, frames and finishes for your model.
DownloadDual inch / mm datasheets
Every profile, frame and infill documented in both US and metric units, with the test basis stated.
DownloadFinish & anodize library
Class-1 anodized clear, bronze, black and gold, plus powder-coat to RAL — coordinated to your palette.
DownloadADA detailing guide
Recess geometry, bevel and gap rules, and flush-transition detailing to support ADA / ICC A117.1 installs.
DownloadFiles are organized on crawlable, indexable pages — discoverable by search and by your spec tools, not buried in a portal.
Built to be specified, ordered and lived with.
The capabilities that make ALUEK an easy “yes” for the architect, the contractor and the owner alike.
Custom-manufactured to your exact opening
Any size, curve, radius corner or zoned scraping-and-wiping layout — fabricated in single pieces to avoid unsightly joins. Recessed flush, or surface-mounted with a tapered ramp where no recess exists.
Heavy-commercial rolling and static loads
Reinforced 6063 aluminum profiles on rubber bearers carry luggage trolleys, pallet jacks and forklift traffic. We publish the test basis per system — not just adjectives.
Designed to support ADA-compliant installs
Flush level thresholds, beveled transitions and rail openings that won't pass a ½-inch sphere when set in a level recess. We give you the geometry to meet ADA and ICC A117.1.
Interchangeable inserts for every soil type
Ribbed rubber, ribbed carpet, nylon scraper, brush strip, abrasive grit and vinyl — selected by soil zone and swappable later to refresh the entrance without replacing the aluminum carrier.
Spec-ready documentation, on your terms
CSI 12 48 13 guide-spec language, CAD details, BIM-ready files, dual inch/mm datasheets and finish libraries — from crawlable pages with no distributor gate and no registration wall.
Factory-direct value, nationwide shipping
Skip the importer markup and the distributor handoff. Buy direct from the extruder, ship anywhere in the USA, with lead times engineered to outpace EU-shipped competitors.
Documented to US standards — not borrowed from EU codes.
Engineered and written to the references American specifiers require. We cite the test basis per system and avoid claims a new brand can't yet substantiate.
ADA & ICC A117.1
Accessible by design
Flush transitions, beveled changes in level, and rail openings that won't pass a ½-inch sphere in a level recess. Designed to support ADA-compliant installations — final compliance lives in the flush, anchored install.
ANSI A326.3 (DCOF)
Slip resistance
Infills can be specified to a wet DCOF target using the current US AcuTest method — confirmed per insert against an accredited test report, not a withdrawn legacy number.
ASTM E648 / NFPA 253
Floor-covering fire
Textile and rubber infills can be specified to a Class I critical-radiant-flux rating; the inert aluminum tread itself is essentially non-combustible.
ASTM B221 · alloy 6063
Aluminum extrusion
Tread rails extruded from architectural 6063-T5/T6 aluminum per ASTM B221 — chosen for clean profiles, corrosion resistance and a superior anodizing response.
CSI MasterFormat 12 48 13
Spec-section ready
Documented to the exact spec section US architects write to — Entrance Floor Mats and Frames — so ALUEK drops straight into your project manual.
Recyclable aluminum
Lifecycle & LEED
Aluminum is 100% recyclable and recycling it uses up to ~95% less energy than primary metal. Zero-VOC anodized finishes and decades-long durability can contribute to LEED — points are awarded to projects, not products.
* Specific performance figures (rolling/static loads, DCOF, fire class, recycled content) are confirmed per SKU against accredited test reports before they are published as guarantees. ALUEK makes no product-level “ADA certified” claim — compliance is achieved by the flush, anchored installation.
Engineered for the entrances that work hardest.
Every sector punishes its entrance differently. We bring the right system, loads and detailing to each.
A made-to-measure process, engineered to be fast.
Send a detail or a rough opening size. We do the engineering, manufacturing, finishing and freight — and keep the lead time ahead of anything crossing the Atlantic.
Share drawings or an opening size
Send a CAD detail, a rough opening size, or even a photo. Our team scopes recessed vs. surface, traffic level, and the right infill zones for the door.
Engineer & specify
We return a made-to-measure proposal with CSI 12 48 13 language, dual inch/mm data, profile and frame selection, finish options and a clear price — typically within two business days.
Extrude & fabricate
6063 aluminum profiles are extruded, anodized or powder-coated, cut to your exact geometry, and assembled with your selected inserts and hinge — including curves, logos and zoned layouts.
Ship factory-direct, nationwide
Your system ships direct from the factory to anywhere in the USA, with lead times engineered to beat trans-Atlantic suppliers and freight handled end to end.
Install support & insert program
Installation details, on-call spec support, and a replaceable-insert program that refreshes the entrance over its life without replacing the aluminum carrier.
One entrance system. Four people who have to say yes.
We earn the specification by giving every stakeholder exactly what they need to commit — not a sales pitch, the documents and the answers.
Architects & Specifiers
“I need to draw it, detail it, and write the spec — without chasing a distributor for files.”
CSI 12 48 13 guide specs, CAD details, BIM-ready files and dual-unit datasheets, all downloadable from aluektrim.com with no gate.
General Contractors
“I need accurate takeoffs, a real lead time, and a system that installs clean and on schedule.”
Made-to-measure shop drawings, end-to-end freight, lead times engineered to beat imports, and installation detail support.
Facility & Property Teams
“I need it to last, stay safe and clean, and not need replacing every few years.”
Heavy-duty aluminum carriers with replaceable, washable inserts — refresh the entrance without replacing the structure.
Developers & Owners
“I want a premium first impression at a price that respects the budget.”
Factory-direct value with a Class-A flush finish — premium entrance design without the importer markup.
Answers for specifiers and buyers.
The questions architects, contractors and facility teams ask most. Need something specific?
Talk to our technical teamSpecifying an entrance? Let's engineer it together.
Quote, sample, or a quick technical call — pick the path that fits where you are in the project. Factory-direct, made to your exact opening, shipped across America.
Request a project quote
Send drawings or an opening size — get a made-to-measure proposal in ~2 business days.
Start a quoteRequest a sample kit
Touch the aluminum and the infills. Physical swatches shipped anywhere in the USA.
Get samplesTalk to a spec consultant
Recessed vs. surface, insert zoning, ADA detailing — talk it through with an engineer.
Book a call